• <tt id="eg8cy"><label id="eg8cy"></label></tt>
  • <bdo id="eg8cy"><xmp id="eg8cy">
    <center id="eg8cy"></center>
    <bdo id="eg8cy"><xmp id="eg8cy"> <bdo id="eg8cy"></bdo>
  • 疏水閥|疏水器|汽水分離器-北京疏水閥門廠
    機械型
    熱靜力型
    熱動力型
    多重密封閥門
    閥門
    氣體輸送系統設備
    凝結水回收系統解決方案
    減溫減壓設備
    管道附件
    熱靜力型
    產品名稱:雙金屬片式溫調疏水閥 【在線訂購 Online order
    雙金屬片式溫調疏水閥
    BIMETALLIC TRAP WITH ADJUSTABLE TEMPERATURE
     
      雙金屬片式疏水閥
      雙金屬片式疏水閥的熱敏元件為兩種不同膨脹率的金屬,為德國進口防銹雙金屬片,其金屬高含鎳鉻元素,通過特殊工藝壓鑄一起的雙金屬片,雙層金屬片在受熱后膨脹,由于不同的膨脹率使其產生的彎曲。利用這種特性制作成疏水閥的熱敏元件起到開關作用。雙金屬片式疏水閥分為不可在線調節(BK,CS17H和CS47)和可在線調節(可調雙金屬片式TB)。
     
    Bimetallic Trap
    The thermo-sensitive element of bimetal element steam traps is a bimetal element cast through a special process by two metals of different expansion ratio. When the bimetal element expands after heated, different expansion ratio results in bending. The thermo-sensitive element produced on the basis of this quality can act as a switch. Bimetal element steam traps are divided into adjustable offline (BK,CS17H and CS47) and online (adjustable bimetal element TB).
     
    優點:
    1、排放溫度可在線調整,安裝姿勢自由。
    2、利用高溫凝結水形成水封,有效減少蒸汽泄漏。
    3、動作靈敏,抗水擊,無噪聲,排空性能優良。
    4、結構簡單,容易維修保養。
    5、用于蒸汽主管、分汽缸、蒸汽伴熱管線、散熱器、低溫加熱槽、夾層鍋等。
    6、適用于高溫蒸汽管線、分汽缸等。
     
    Merits
    1.Discharge temperature adjustable online by free installation posture.
    2.High-temperature condensate water used to form water seal so as to effectively reduce steam leakage.
    3.Flexible and noiseless, water hammer resistant, and good emptying performance.
    4.Simple structure, easy to maintain and repair.
    5.Adoptable for steam main pipes, gas distribution cylinders, steam tracing pipes, radiators, low-temperature heating trough, double layered pots and so on.
    6.Adoptable for high-temperature steam pipes, gas distribution cylinders and so on.
     
    性能:
    可調整凝結水的排放溫度,有效地利用凝結水的顯熱。
    閥前始終有凝結水,形成水封,無蒸汽泄漏。
    可任意角度安裝,并隨時可調整排水溫度。
    合金球面閥芯與不銹鋼閥座耐沖蝕,使用壽命長。
     
    Performance
    Capable of adjusting the discharge temperature of condensate water so as to make effective use of its sensible heat. 
    Existing condensate water in front of the valve to form water seal to prevent steam leakage.
    Capable of installation in any direction and water discharge temperature adjustable at any time.
    Long durability thanks to washing and corrosion resistant alloy sphere valve core and stainless valve seat.
     
    技術參數/Technique parameter

    殼體壓力等級
    Shell pressure grade
    負荷泄漏率
    Load leakage rate
    使用介質
    Used medium
    允許背壓率
    Permitted backpressure rate
    節能效果
    Energy saving effect
    適用過熱蒸汽
    Use superheated steam
    1.6、2.5、4.0MPA
    0%
    蒸汽、凝結水
    Steam、Condensate water
    75%
    優秀
    Excellence
    適應
    Adaption

    最大工作壓差
    Maximum operating pressure differential
    抗凍性
    Freezing resistance
    最高允許溫度
    Maximum allowable temperature
    排空氣裝置
    Air exhaust system
    抗水擊
    Resist
    3.2MPA
    優秀
    Excellence
    420℃
    自動
    Automatic
    適應
    Adaption

     
    主要零件材料/The materials of primary accessories

    零部件名稱Part and component name
    材質Material
    閥體、閥蓋Valve body、Valve cover
    鍛鋼、不銹鋼Forged steel、Stainless steel
    雙金屬片Bimetal
    德國防銹高靈敏金屬Stainless metal
    閥座、閥瓣Valve seat、Valve clack
    STL合金、高鉻不銹鋼STL alloy、High chrome stainless steel
    過濾網Filtrating screen
    不銹鋼Stainless steel

     
    [page_break]
    雙金屬片式溫調疏水閥
    BIMETALLIC TRAP WITH ADJUSTABLE TEMPERATURE
     
    外型尺寸和重量/Prime out-form dimensions and weigh

    產品型號
    Product model
    口徑(DN)
    Calibre
    L法蘭
    Flange
    螺紋/焊接
    Thread/weldingL
    H1
    H2
    W
    重量(kg)
    Weight
    使用壓力范圍(Mpa)
    Pressure change range
    公稱壓力(Mpa)
    Nominal pressure
    TB5
    TB5W
    15~20
    25
    -
    80
    85
    93
    23
    50
    1.5
    0.1-3.2
    4.0
    TB5F
    15~20
    25
    150
    160
    -
    93
    93
    23
    23
    50
    50
    3.3
    3.5
    0.1-3.2
    4.0
    TB11
    TB11W
    15~20
    25
    -
    90
    95
    106
    27
    60
    1.5
    0.1-1.6
    2.5
    TB11F
    15~20
    25
    32~50
    150
    160
    230
    -
    106
    106
    160
    27
    27
    75
    60
    60
    120
    3.2
    3.5
    13
    0.1-1.6
    2.5

     
    注解:
    1、選型時請提供工作壓力、工作壓差、凝結水發生量、工作溫度、連接方式及標準。
    2、凝結水負荷的安全系數一般為2~3倍。
    3、正確安裝、定期保養清除閥內污物,保證疏水閥正常工作和延長使用壽命。    
    4、TB3與TB5相同,TB6與TB11相同。
     
    Note
    1. Please provide operating pressure and pressure difference, generating quantity of condensate water, operating temperature, connecting mode and standards in selecting product models.
    2. The load of condensate water’s safety coefficient reaches 2 to 3 times in general.
    3. Please make sure the drain valve is installed properly, maintained regularly, cleaned up and operates under the normal condition, so as to extend its service life.
    4. TB3 and TB5 same, TB6 and TB11 same.
              
    雙金屬片式疏水閥熱靜力式(波紋管)疏水閥在線訂購 Online order】 【打印 Print】 【返回 Back
    Home | About Us | News | Products | Contacts
  • <tt id="eg8cy"><label id="eg8cy"></label></tt>
  • <bdo id="eg8cy"><xmp id="eg8cy">
    <center id="eg8cy"></center>
    <bdo id="eg8cy"><xmp id="eg8cy"> <bdo id="eg8cy"></bdo>
  • 91精品国产自产在线观看_久久大香萑太香蕉综合网_女神级极品嫩模露脸啪啪自拍_免费a级毛片网站