|
倒吊桶式疏水閥
倒吊桶式疏水閥
倒吊桶式蒸汽疏水閥它是利用冷凝水和蒸汽密度差的工作原理，內部結構是由杠桿系統連接倒吊桶，克服蒸汽壓力開關。倒吊桶式疏水閥內部是一個倒吊桶為液位敏感件，吊桶開口向下。裝置剛啟動時，管道內出現空氣和低溫冷凝水，此時疏水閥是全開放，空氣和低溫冷凝水迅速排出，裝置很快提升溫度。當蒸汽進入倒吊桶內，倒吊桶產生向上浮力，倒吊桶連接杠桿帶動閥芯關閉閥門。倒吊桶上開有一小孔，能自動排空氣，當一部份蒸汽從小孔排出，另一部份蒸汽產生凝結水，倒吊桶失去浮力向下沉，倒吊桶連接杠桿帶動閥芯開啟閥門。當蒸汽再進入倒吊桶內，閥門再關閉，循環工作，間斷排水。
倒吊桶式蒸汽疏水閥是機械型蒸汽疏水閥中堅固的疏水閥之一，它的優點是：不怕水擊，能連續排不冷凝氣體，抗污性能好；最高背壓≥90%，所有內件都是不銹鋼制造，耐磨損、抗腐蝕；球形閥芯和閥座是線接觸，密封性能好，使用壽命長；間斷排水和連續排水，能排接近飽和溫度冷凝水，使加熱設備達到高效工作效率。倒吊桶式蒸汽疏水閥的閥座處于水密封的保護下，工作時無新鮮蒸汽泄漏，節能效果好。
它適用于石油、化工、印刷、造紙、制藥等工業蒸汽加熱設備和蒸汽管網的阻汽排水。
Inverted Bucket Trap
The interior of the inverted bucket steam trap: this valve adopts the operating principles of density difference between condensate water and steam, and the leverage system connects with inverted bucket to form its internal structure, thus controlling the open and close of the steam pressure. The interior of the inverted bucket steam trap is an inverted bucket, a liquid level sensitive part, with the bucket’s opening downward. When the device just started, air and low temperature condensate water occur in the pipes, at the moment the steam trap opens thoroughly, the air and low-temperature condensate water are discharged rapidly and the temperature of the device rises immediately. When any steam enters into the inverted bucket, the bucket will obtain buoyancy and the fixed lever of the bucket drives the valve core to close the valve. There is small aperture on the inverted bucket, which can discharge air automatically. As some of steam is discharged from such aperture, while other steam produces condensate water. The inverted bucket loses the buoyancy and sinks down and its fixed lever drives the valve core to open the valve. When the steam re-enters into the bucket, the valve will close again. It repeats the said procedures to discharge water intermittently.
The interior of the inverted bucket steam trap is one of the most strong steam traps among mechanical steam trap, and its strength are shown as follows: can resist water hammer and drain non-condensing air continuously, with good anti-pollution performance; the maximum back pressure being ≥90%; all internal parts are made of stainless steel with anti-abrasion and anti-erosion capability; the spheric valve core and valve seat realize line contact, with excellent sealing performance and long service life; it can drain intermittently and continuously and can discharge the condensate water that is nearly at saturation temperature to offer optimal work efficiency to the heating equipment, its steam trap valve seat is protected by water sealing, so no fresh steam will leak out during the operating process to obtain good energy-saving effects.
The product applies to such industrial steam heating equipment as petroleum, chemical, printing, paper making and pharmaceuticals and discharge of the steam pipe network.
優點：
1、內腔所有運動部件均為不銹鋼，耐磨損，耐腐蝕。
2、由于蒸汽不能到達被水封的閥座孔，所以無蒸汽損失，高效節能。
3、浮桶倒置，不會被破壞壓扁，不怕水擊，壽命長。
4、倒置桶頂部設有排氣孔，連續排空氣性能好，不會形成冷滯后和氣堵。
5、不受背壓的影響，在高的背壓下能很好地工作。
6、工作可靠，只有兩個運動部件 (自由杠桿結構和倒置桶 ) ，故不會產生卡阻。
7、閥座與閥瓣在閥的頂部，閥瓣在開關中可以使污物通過，有良好的自我清洗性能 ，無污物困擾。
Merits
1. All moving parts of the internal cavity are made of stainless steel, capable of resistance to abrasion and erosion.
2. As the steam cannot reach the sealed aperture of the valve seat by water, the steam will not lose but has high efficiency and save energy.
3. The float bucket is located inversely. It can resist to water’s strike and has long service lift.
4. The invented bucket has gas vent and performance of discharging the air continuously is excellent, without forming cool hysteresis and air blocking.
5. It is free of the affect of the back pressure and can perform well under high back pressure.
6. It has reliable operation and only two moving parts—free lever structure and inverted bucket, so no blockage is produced.
7. The valve seat and valve disc are located at the top of the valve. The valve disc allows the pollutants to pass, so it attains good self-cleaning performance, without affected by pollutants.
[page_break]
倒吊桶式疏水閥
技術參數/Technique parameter
|
殼體壓力等級
Shell pressure grade |
負荷泄漏率
Load leakage rate |
使用介質
Used medium |
排出高溫氣體
Discharging of high-temperature air |
允許背壓率
Permitted backpressure rate |
節能效果
Energy saving effect |
|
1.6、2.5、4.0MPA |
≈0% |
蒸汽、凝結水
Steam、Condensate water |
適應
Adaption |
≥90% |
優秀
Excellence |
|
處理污物
Disposal of feculence |
最大工作壓差
Maximum operating pressure differential |
排水方式
Drainage method |
最高允許溫度
Maximum allowable temperature |
排空氣裝置
Air exhaust system |
抗水擊
Resist |
|
適應
Adaption |
4.0MPA |
連續方式
Continue mode |
420℃ |
手動、自動
Manual、Automatic |
適應
Adaption |
主要零件材料/The materials of primary accessories
|
零部件名稱Part and component name |
材質Material |
|
閥體、閥蓋Valve body、valve cover |
鑄鋼、不銹鋼、合金鋼Cast steel、Stainless steel、Alloy steel |
|
吊桶、杠桿Inverted bucket、Lever |
304/316不銹鋼304/316 Stainless steel |
|
閥座、閥瓣Valve seat、Valve clack |
STL合金、高鉻不銹鋼STLAlloy、High chrome stainless steel |
|
過濾網Filtrating screen |
不銹鋼Stainless steel |
工作運轉流程圖 □空氣 ■蒸汽 ■凝結水
1、疏水閥關閉：
疏水閥初始充水后，蒸汽開始進入疏水閥并在倒吊桶頂部積聚，把倒吊桶浮起，將閥瓣推入閥座。
Steam trap closes
The steam trap is filled with water first, steam begins to enter the steam trap and accumulates at the top of the inverted bucket, and then lifts the bucket upward, the valve disc is pushed into the valve seat.
2、疏水閥開始打開：
冷凝水開始流入疏水閥，蒸汽和空氣被擠出倒吊桶，使桶漸失浮力，開始拉動閥瓣拉開閥座。
Steam trap starts to open
The condensate water starts to flow into the steam trap, steam and air are expelled from the inverted bucket, and the bucket will lose buoyancy gradually and begins to pull the valve disc to open the valve seat.
3、疏水閥排水：
當足夠的冷凝水進入疏水閥，蒸汽和空氣被擠出倒吊桶后，倒吊桶落下，將閥瓣拉離閥座，疏水閥向外推出冷凝水和空氣。
Steam trap discharge water
When adequate condensate water enters into the steam trap, steam and air are expelled from the inverted bucket, and the inverted bucket drops to pull the valve disc away from the valve seat, the steam trap drives the condensate water and air outward.
4、疏水閥關閉：
在冷凝水停止流入后，蒸汽進入疏水閥并浮起倒吊桶，迫使閥瓣插入閥座，循環重復。
Steam trap closes
When the condensate water stop flowing in, steam enters into the steam trap and drifts the inverted bucket up to force the valve disc to insert into valve seat. These procedures repeat.
[page_break]
外型尺寸和重量/Prime out-form dimensions and weigh
|
產品型號
Product model |
口徑(DN)
Calibre |
L法蘭
Flange |
螺紋/焊接
Thread/weldingL |
H1 |
H2 |
W |
重量(kg)
Weight |
使用壓力范圍(Mpa)
Pressure change range |
公稱壓力(Mpa)
Nominal pressure |
|
81U
81UF |
15~20
25 |
190
200 |
135
135 |
75 |
112 |
103 |
4.7
7.5 |
0.1-2.5·3.2 |
2.5-4.0 |
|
82U
82UF |
15~25
32~50 |
240
260 |
180
- |
45 |
190 |
145 |
10
12~14 |
0.1-2.5·3.2 |
2.5-4.0 |
|
83U
83UF |
15~25
32~40
50 |
300
310
320 |
215
215
- |
124 |
198 |
178 |
17.5
22
23 |
0.1-2.5·3.2 |
2.5-4.0 |
|
84U
84UF |
25
32~40
50 |
340
350
360 |
245 |
174 |
246 |
205 |
25
28
30 |
0.1-2.5·3.2 |
2.5-4.0 |
|
85UF |
20~65 |
400 |
260 |
170 |
205 |
240 |
46 |
0.1-2.5·3.2 |
2.5-4.0 |
|
86UF |
50~100 |
430 |
330 |
260 |
280 |
290 |
60 |
0.1-2.5·3.2 |
2.5-4.0 |
注解：
1、選型時請提供工作壓力、工作壓差、凝結水發生量、工作溫度、連接方式及標準。
2、凝結水負荷的安全系數一般為2～3倍。
3、正確安裝、定期保養清除閥內污物，保證疏水閥正常工作和延長使用壽命。
4、型號尾數數值相同，其排水量也相同。
Note
1. Please provide operating pressure and operating pressure difference, generating quantity of condensate water, operating temperature, connecting mode and standards in selecting product models.
2. The load of condensate water’s safety coefficient reaches 2 to 3 times in general.
3. Please make sure the drain valve is installed properly, maintained regularly, cleaned up and operates under the normal condition, so as to extend its service life.
4. The products with same mantissa figure at their models have the same discharge capacity.
[page_break]
倒吊桶式疏水閥
1、對凝結水的發生量適應性強，即可間歇排放，又可連續排放。
2、汽水分離可靠，閥內始終處于水封狀態，有效阻止蒸汽泄漏。
3、敞口型的浮子抗水擊，設有排氣孔，防止汽鎖或氣堵現象。
4、用于蒸汽主管、分汽缸、熱交換器、硫化機、干燥機、空調機、醫院用汽設備等。
Main Features
1. Have strong adaptive capacity to the occurrence quantity of condensation water, namely, the ability to both intermittent and continuous discharge.
2. Reliable separation of steam and water, the inner part of the valve is always in water seal state, which can effectively prevent the leakage of steam.
3. Open mouth-shaped float resists water attack, and is equipped with a vent so as to prevent vapor lock or gas block.
4. Mainly used in the steam main pipe, sub-cylinder, heat exchanger, vulcanizing machine, dryer, air-conditioning machine, hospital steam equipment, etc.
技術參數/Technique parameter
|
產品型號
Product model |
技術參數Technique parameter |
|
閥體材料
Velve body material |
PMA(Mpa) |
最高允許溫度(℃)
Maximum allowable temperature |
適用介質
Used medium |
|
ESH21(W/F) |
碳鋼
Carbon steel |
6.4 |
425 |
蒸汽,凝結水
Steam,condensate water |
|
ES5、ESU5、ESU5F
ES8B、ES10F、ES12N |
碳鋼
Carbon steel |
2.5 |
425 |
蒸汽,凝結水
Steam,condensate water |
主要零件材料/The materials of primary accessories
|
零部件名稱Part and component name |
材質Material |
|
閥體、閥蓋Valve body、valve cover |
鑄鐵、WCB、不銹鋼Cast-iron、WCB、Stainless steel |
|
浮桶Bucket float |
不銹鋼Stainless steel |
|
閥座、閥瓣Valve seat、Valve clack |
不銹鋼Stainless steel |
|
吊鉤、連接片Hook, connecting sheet |
不銹鋼Stainless steel |
|
過濾網Filtrating screen |
不銹鋼Stainless steel |
外型尺寸和重量/Prime out-form dimensions and weigh
|
產品型號
Product model |
口徑(DN)
Calibre |
L法蘭
Flange |
螺紋/焊接Thread/weldingL |
H1 |
H2 |
W |
重量(kg)
Weight |
使用壓力范圍(Mpa)
Pressure change range |
公稱壓力(Mpa)
Nominal pressure |
|
ESH5 |
15~25 |
210 |
110 |
60 |
70 |
75 |
3.5 |
0.1-1.6·2.1 |
2.5 |
|
ESH8(W/F) |
15~25 |
210 |
135 |
85 |
90 |
100 |
5/7 |
0.1-1.6·2.1 |
2.5 |
|
ESH10(W/F) |
20~50 |
260 |
200 |
120 |
134 |
120 |
10/15 |
0.1-1.6·2.1 |
2.5 |
|
ESH12(W/F) |
20~50 |
290 |
220 |
105 |
140 |
120 |
14/17 |
0.1-1.6·2.1 |
2.5 |
|
ESH21(W/F) |
15~50 |
310 |
300 |
130 |
150 |
200 |
28/34 |
0.1-2.1·4.5 |
6.4 |
[page_break]
優點：
1、對凝結水的發生量適應性強，即可間斷排放，又可連續排放。
2、內部裝有大排量的雙閥座差壓機和SCCV關閉系統，體積小而排量大。
3、內部零件全部采用不銹鋼制造，并且安裝在閥蓋上維修保養極為方便。
4、背壓率高（90％）。
5、汽水分離可靠（水汽經U型通道從閥下部進入），閥內始終處于水封狀態，有效阻止蒸汽泄漏。
6、敞口形的浮子抗水擊，吊桶上設有溢出排氣孔，可有效防止蒸汽汽鎖、空氣氣堵現象（非凝結性的高溫空氣也排除）。
7、與杠桿機構結合制造高壓閥。
Merits
1.Strong adaptability to happening of condensate water, capable of intermittent or continuous discharge.
2.Equipped with double-valve pressure differentiator and SCCV shutdown system, with small size but large discharge capacity.
3.All inner parts made of stainless steel and mounted on valve covers, easy to maintain and repair.
4.High backpressure rate of 90%.
5.Reliable separation of vapor and water (vapor enters from the lower part of the valve through the U-shape passage), the inner part of the valve is in water seal state, which effectively prevents the leakage of steam.
6.Water-resistant open floater with gas vent through the bucket’s vent, effective to prevent steam locking or air blocking (except the non-condensed high-temperature air).
7.Suitable to be joined with lever mechanism for producing high-pressure valves.
技術參數/Technique parameter
|
殼體壓力等級
Shell pressure grade |
負荷泄漏率
Load leakage rate |
使用介質
Used medium |
允許背壓率
Permitted backpressure rate |
節能效果
Energy saving effect |
排空氣裝置
Air exhaust system |
|
2.5、4.0、6.4、12MPA |
≈0% |
蒸汽、凝結水
Steam、Condensate water |
≥90% |
優秀
Excellence |
自動
Automatic |
主要零件材料/The materials of primary accessories
|
零部件名稱Part and component name |
材質Material |
|
閥體、閥蓋Valve body、valve cover |
鑄鋼、不銹鋼、合金鋼Cast steel、Stainless steel、Alloy steel |
|
吊桶、杠桿Inverted bucket、Lever |
304/316不銹鋼304/316 Stainless steel |
|
閥座、閥瓣Valve seat、Valve clack |
STL合金、高鉻不銹鋼STLAlloy、High chrome stainless steel |
|
過濾網Filtrating screen |
不銹鋼Stainless steel |
外型尺寸和重量/Prime out-form dimensions and weigh
|
產品型號
Product model |
口徑(DN)
Calibre |
L法蘭
Flange |
螺紋/焊接Thread/weldingL |
H1 |
H2 |
H3 |
重量(kg)
Weight |
使用壓力范圍(Mpa)
Pressure change range |
公稱壓力(Mpa)
Nominal pressure |
|
ER105(F) |
15~25
32~50 |
270
270 |
200 |
155
155 |
134
134 |
- |
10
13.5/15 |
0.1-1.6 |
2.5 |
|
ER110 |
15~25
32~50 |
310
310 |
- |
220
220 |
165
165 |
- |
19
23 |
0.1-1.6 |
2.5 |
|
ER116 |
15~25
32~50 |
310
310 |
- |
220
220 |
165
165 |
- |
19
23 |
0.1-2.5 |
4.0 |
|
ER120 |
32~65 |
400 |
340 |
220 |
217 |
- |
46 |
0.1-2.5 |
4.0 |
|
ER25(W) |
15~25
32~50 |
380
380 |
380 |
210
210 |
180
180 |
345
345 |
45
47 |
0.1-4.5·6.5 |
6.4-100 |
注解：
1、選型時請提供工作壓力、工作壓差、凝結水發生量、工作溫度、連接方式及標準。,
2、凝結水負荷的安全系數一般為2～3倍。
3、正確安裝、定期保養清除閥內污物，保證疏水閥正常工作和延長使用壽命。
Note
1. Please provide operating p, ressure and operating pressure difference, generating quantity of condensate water, operating temperature, connecting mode and standards in selecting product models.
2. The load of condensate water’s safety coefficient reaches 2 to 3 times in general.
3. Please make sure the drain valve is installed properly, maintained regularly, cleaned up and operates under the normal condition, so as to extend its service life.
[page_break]
技術參數/Technique parameter
|
殼體壓力等級
Shell pressure grade |
負荷泄漏率
Load leakage rate |
使用介質
Used medium |
排出高溫氣體
Discharging of high-temperature air |
允許背壓率
Permitted backpressure rate |
節能效果
Energy saving effect |
|
4.0、22.0MPA |
≈0% |
蒸汽、凝結水
Steam、Condensate water |
適應
Adaption |
≥90% |
優秀
Excellence |
|
處理污物
Disposal of feculence |
最大工作壓差
Maximum operating pressure differential |
排水方式
Drainage method |
最高允許溫度
Maximum allowable temperature |
排空氣裝置
Air exhaust system |
抗水擊
Resist |
|
適應
Adaption |
4.0-10.0MPA |
間接方式
Indirect way |
420℃ |
自動
Automatic |
適應
Adaption |
主要零件材料/The materials of primary accessories
|
零部件名稱Part and component name |
材質Material |
|
閥體、閥蓋Valve body、valve cover |
鑄鋼、不銹鋼、合金鋼Cast steel、Stainless steel、Alloy steel |
|
吊桶、杠桿Inverted bucket、Lever |
304/316不銹鋼304/316 Stainless steel |
|
閥座、閥瓣Valve seat、Valve clack |
STL合金、高鉻不銹鋼STLAlloy、High chrome stainless steel |
|
過濾網Filtrating screen |
不銹鋼Stainless steel |
外型尺寸和重量/Prime out-form dimensions and weigh
|
產品型號
Product model |
口徑(DN)
Calibre |
L法蘭
Flange |
螺紋/焊接
Thread/weldingL |
H |
H1 |
W |
重量(kg)
Weight |
使用壓力范圍(Mpa)
Pressure change range |
公稱壓力(Mpa)
Nominal pressure |
|
WDVER411F |
15~50 |
495 |
- |
495 |
- |
280 |
- |
0.1-10.0 |
15 |
|
DT421 |
15~25 |
- |
310 |
115 |
165 |
210 |
- |
|
|
|
DT1811 |
15~25 |
- |
110 |
166 |
140 |
73 |
- |
0.1-2.8 |
4.0 |
|
DT1812 |
15~25 |
- |
130 |
230 |
190 |
108 |
- |
0.1-4.5 |
6.4 |
[page_break]
倒吊桶式疏水閥
技術參數/Technique parameter
|
殼體壓力等級
Shell pressure grade |
負荷泄漏率
Load leakage, rate |
使用介質
Used medium |
排出高溫氣體
Discharging of high-temperature air |
允許背壓率
Permitted backpressure rate |
節能效果
Ener, gy saving effect |
|
2.5、4.0、6.4MPA |
≈0% |
蒸汽、凝結水
Steam、Condensate water |
適應
Adaption |
≥90% |
優秀
Excellence |
|
處理污物
Disposal of feculence |
最大工作壓差
Maximum operating pressure differential |
排水方式
Drainage method |
最高允許溫度
Maximum allowable temperature |
排空氣裝置
Air exhaust system |
抗水擊
Resist |
|
適應
Adaption |
4.5MPA |
間接方式
Indirect way |
420℃ |
自動
Automatic |
適應
Adaption |
主要零件材料/The materials of primary accessories
|
零部件名稱Part and component name |
材質Material |
|
閥體、閥蓋Valve body、valve cover |
鑄鋼、不銹鋼、合金鋼Cast steel、Stainless steel、Alloy steel |
|
吊桶、杠桿Inverted bucket、Lever |
304/316不銹鋼304/316 Stainless steel |
|
閥座、閥瓣Valve seat、Valve clack |
STL合金、高鉻不銹鋼STLAlloy、High chrome stainless steel |
|
過濾網Filtrating screen |
不銹鋼Stainless steel |
外型尺寸和重量/Prime out-form dimensions and weigh
|
型號(螺紋和承插焊)
Model (screw thread
and socket welding) |
型號(法蘭) Model (flange) |
管道連接mm
Pipe connection |
Amm |
Bmm |
BBmm |
Gmm |
Kmm |
螺栓數量
Number of bolts |
重量(螺紋和承插焊)kg
Weight (screw thread
and socket welding) kg |
重量(kg)
Weight |
|
31L |
31LF |
15，20 |
117 |
202 |
306 |
78 |
14.3 |
6 |
4.5 |
5.4 |
|
32L |
32LF |
15，20，25 |
171 |
259 |
313 |
121 |
31.7 |
6 |
13.6 |
14.5 |
|
33L |
33LF |
15，20，25 |
203 |
292 |
352 |
130 |
36.5
|
8 |
22.7 |
23.1 |
|
34L |
34LF |
25，32 |
219 |
348 |
408 |
146 |
36.5 |
8 |
31.8 |
33.1 |
|
35L |
35LF |
25，32，40 |
248 |
381 |
446 |
168 |
44.4 |
9 |
44.5 |
46.1 |
|
36L |
36LF |
40，50 |
302 |
435 |
500 |
213 |
54.0 |
10 |
81.2 |
83.5 |
|
