|
先導活塞浮球蒸汽疏水閥
PISTON BALL FLOAT TRAP
特點/性能
1、自由浮球先導機構確保無凝結水滯留。
2、活塞閥芯平穩開啟，超大排量。
3、“蒸汽緩沖”防止主閥芯硬性碰撞在閥座上。
4、無需從管線上拆下來，就可對所有內件進行維修保養。
5、內置大面積過濾網給疏水閥提供了較大限度的保護。
Characteristic/Performance
1. The free-ball float’s pilot mechanism ensures there is no condensate water left over.
2. The valve core of the piston is opened stably with overlarge displacement.
3. “Steam buffering” is to prevent the main valve core from bumping onto the valve seat.
4. It can be maintained and cleaned up without need removing from the pipeline.
5. The built-in large-area screen offers maximum protection for the steam trap.
用途：
JH10型用于高溫、高壓、飽和蒸汽、過熱蒸汽的蒸汽主管、蒸汽伴熱管線和加熱設備。
JH15型用于中高壓大型加熱、干燥、分餾及其它產生大量凝結水蒸汽設備。
Purpose：
JH10 Model applies to steam main pipe, steam tracing pipeline and heating equipment with high temperature and pressure, saturated steam and overheated steam.
JH15 Model applies to such steam equipment as medium-and high large heating, drying, distilling and other device generating plenty of condensate water-vapor.
技術參數/Technique parameter
|
產品型號
Product model |
通徑(″)
Passage |
連接方式(標準)
Connecting method(Standard) |
使用壓力范圍(Mpa)
Pressure change range |
公稱壓力(Mpa)
Nominal pressure |
最高允許溫度(℃)
Maximum allowable temperature |
閥體材質
Valve material |
外形尺寸Form size(mm) |
重量(kg)
Weight |
|
L |
H |
H1 |
H2 |
W |
|
JH10 |
3-6 |
法蘭
(JIS，ANSI，GB) |
0.2～2.1·4.5 |
6.3
10.0 |
425 |
WCB
WC6 |
600 |
570 |
395 |
- |
- |
147 |
|
475 |
|
JH15E-21
46 |
3-6 |
法蘭
(JIS，ANSI，GB) |
0.05～2.1·4.6 |
6.3
10.0 |
425 |
WCB
WC6 |
775 |
635 |
440 |
410 |
250 |
240 |
|
475 |
|
JH15M-21
46 |
3-6 |
法蘭
(JIS，ANSI，GB) |
0.05～2.1·4.6 |
6.3
10.0 |
425 |
WCB
WC6 |
775 |
635 |
440 |
410 |
250 |
240 |
|
475 |
|
JH15S-21
46 |
3-6 |
法蘭
(JIS，ANSI，GB) |
0.05～2.1·4.6 |
6.3
10.0 |
425 |
WCB
WC6 |
775 |
635 |
440 |
410 |
250 |
240 |
|
475 |
注解：
1、選型時請提供工作壓力、工作壓差、凝結水發生量、工作溫度、連接方式及標準。
2、凝結水負荷的安全系數一般為1.5～2倍。
3、正確安裝、定期保養清除閥內污物，保證疏水閥正常工作和延長使用壽命。
Note
1. Please provide operating pressure and operating pressure difference, generating quantity of condensation water, operating temperature, connecting mode and standards in selecting product models.
2.The load of condensation water’s safety coefficient reaches 1.5 to 2 times in general.
3. Please make sure the drain valve is installed properly, maintained regularly, cleaned up and operates under the normal condition, so as to extend its service life. |
